How To Change Xbox One Ip Address

In that location are several reasons why you might want to fix a static IP on the Xbox One console. The most common reason is for those who are looking to setup port forwarding on their console in gild to correct a strict NAT type. If you are looking to setup a static IP on Xbox I, this guide will help you achieve information technology. The process is quick and uncomplicated.

What Is A Static IP?

You can read more about this here, but the short version is that when your Xbox connects to the network, it gets an IP accost automatically. This will often be different every time. When you lot set the IP to static, your Xbox will use the exact aforementioned IP every fourth dimension. This allows yous to configure some rules in your router, like port forwarding and yous will not take to change anything the next fourth dimension yous connect to the internet.

Ready Static IP On Xbox

To ready a static IP on the Xbox One, you will need to navigate to the network settings of the console. This can exist constitute under the following navigation tree from the consoles setting menu.

General -> Network Settings -> Avant-garde Settings -> IP settings

xbox ip settings — Before you lot begin configuring anything, take annotation of what the current IP settings are for your network. This saves you lot having to effigy anything out on your ain. The values volition likely be unlike for you simply they volition be in the same location.

Select IP Settings -> Transmission

Once y'all select this, the Xbox will guide you through a sorcerer of setting the diverse values. The most important here is the offset IPV4 value. I would suggest you lot change this to something a flake higher than what it currently is. In my case above, I have an IP accost of 192.168.one.10. I would suggest you change this to something like 192.168.ane.150. This fashion it is unlikely to end with an IP address conflict.

Once this process is complete, the Xbox will check if it tin connect to the internet. If yous entered everything correctly, you should at present be using a static IP!